Danfoss DLX 4.6 Podręcznik Użytkownika Pobierz pdf (Strona 9)

User Guide DLX Series L00410623-1 9

2.4.3. Unpacking

Unpack the inverter as follows:

• Place the box in position, with the top clearly visible and according to the arrow

markings on the packaging.

• Cut the seal, and open the box.

• Take out the lock clip, the bag with accessories and the Installation Guide lying on the

upper section of the foam packaging material.

• Remove the upper part of the foam packaging material.

• Both sides of the inverter case are narrowed in order to get a

better grip on the device. Lift up the inverter carefully out of

the box using the “handles” illustrated in Figure 2.4.2.

• Remove the lower section of the foam packaging and take

out the inverter mounting bracket.

• Store all the original packaging for possible later reuse.

Figure 2.4.2: “Handles”

After unpacking the inverter safely, check that all components are present and in an

undamaged condition.

2.4.4. Scope of Delivery

• DLX single phase inverter

• Mounting bracket

• Installation Guide

• Accessories: grounding strap, bracket screws, lock clip, extra type label

NOTICE

The mating parts of the connectors are not part of the standard scope of supply,

and must be provided by the system installer.

2.4.5. Inverter Structure

The housing of the DLX inverter is designed to:

• IP 65 for indoor or outdoor use.

• Provide a degree of protection from dirt, rain, sleet, snow, dust, water, and corrosion.

• Be undamaged by the external formation of ice on the housing.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 85 86

Brak uwag

Danfoss DLX 4.6 Podręcznik Użytkownika Strona 9